Report contents
Industry landscape
Where the company competes: a fragmented analog market with one clear leader
Texas Instruments sells analog semiconductors: the chips that regulate power, convert signals, amplify, and interface between components. Analog accounted for roughly three-quarters of the $15.6 billion in revenue the company reported for 2024 in its 10-K, with embedded processing (microcontrollers and processors) at about a fifth and a small remainder of calculators and DLP display chips. The mix matters more than the label suggests. An analog part gets designed onto a customer's board and then usually stays there for a decade or more, so the contest is decided at the design win, not on a distributor's price list.
Upstream, TI is unusual among chipmakers of its size: it owns and runs its own fabs, including the largest cluster of 300-millimeter analog capacity anywhere. It still buys from concentrated suppliers — ASML for lithography, Applied Materials and Lam for deposition and etch, Shin-Etsu and SUMCO for wafers — but it turns capital into wafers itself instead of renting foundry capacity. Downstream, the customer base is deliberately spread. The 10-K reports more than 100,000 customers, with the largest at about 10% of revenue, across industrial, automotive, personal electronics, communications equipment, and enterprise systems. Around 80% of revenue now moves through TI's own direct sales force and website, up from about a third in 2019, which shortens the loop from order to fab.
The submarket is catalog analog, sold globally
The precise arena is general-purpose analog — power management ICs, amplifiers, data converters, interface and clocking — plus embedded microcontrollers, sold as catalog parts that many customers buy in modest volumes. TI carries something like 80,000 part numbers. This is a different business from high-performance application-specific analog, where Analog Devices is strongest, and from the RF front-end modules that carry Skyworks.
The geographic boundary is global on the demand side. A design win is won at a customer's engineering bench, often in the US, Europe, Japan, China, or Korea, and the same part then ships worldwide. Manufacturing has become regional: TI is building fabs in Sherman, Texas and Lehi, Utah partly because customers and governments now pay for supply security, not just unit cost. Scale advantages accrue globally; the costs of scale are incurred locally.
Structure: many competitors, one leader
The analog market is large and genuinely fragmented. Industry estimates put it at roughly $80 billion in 2024. TI does not disclose a share figure in its filings, and third-party estimates consistently place it near 19-20%, with no rival above about 10%.
| Supplier | Approx. share of global analog, 2024 (estimate) |
|---|---|
| Texas Instruments | 19-20% |
| Analog Devices | ~10% |
| Infineon | ~6% |
| Skyworks | ~5% |
| STMicroelectronics | ~5% |
| NXP | ~4% |
Below that group sit Renesas, onsemi, Microchip, and several hundred smaller suppliers, many of them single-product specialists.
That structure is the central fact of the investment case. A dozen credible competitors means entry at the low end is not hard: a fab-lite designer can build a superior part for one function and win a socket. What is hard is replicating TI's position across 80,000 parts, 100,000 customers, and a 300mm cost base. TI has said 300mm manufacturing lowers die cost by about 40% versus 200mm, and that gap funds the price concessions the company has used to hold catalog sockets through the downturn.
What the fragmentation does and does not tell you
The question that matters is whether the leader's share is stable. TI's revenue fell from $20.0 billion in 2022 to $15.6 billion in 2024, per the 10-K, a steeper drop than the analog market itself over that stretch. The evidence so far does not show share gains through the downturn, and part of the decline reflected customers burning off inventory they had accumulated in 2021-2022. Whether TI comes out with share intact depends on whether the 300mm capacity it is adding gets absorbed without a permanent price concession. Capacity utilization at Sherman is the number to watch: if utilization climbs while gross margin recovers toward the mid-60s, the cost advantage is doing its job. If margin stays in the 50s as revenue recovers, the company is paying for that capacity with price.
Competitive advantage
Does the company have a moat? Yes, a fairly strong one on returns, narrower on share
Overall rating: Fairly Strong. Texas Instruments has held the top position in analog semiconductors for more than a decade, and its returns cleared its cost of capital in every one of the last five years, including the deepest inventory correction the analog market has absorbed since 2019. Both facts point to barriers to entry. Neither is overwhelming. TI sells into a market with at least a dozen credible competitors, and its return on capital roughly halved from the 2022 peak.
The two tests matter because each answers a different question. A market that stays concentrated while the leader earns excess returns is one where entrants have tried and largely failed to dislodge the top firm; that is what structural protection looks like from the outside. High profits that fade within a cycle usually reflect good execution in a boom, which competitors copy. Analog sits between those cases, and the ratings below separate what the filings support from what they do not.
Market position: first place with about twice the next rival's share
TI does not publish market share. Third-party estimates for 2024 put it at roughly 19-20% of a global analog market of about $80 billion, with Analog Devices near 10% and Infineon, Skyworks, STMicroelectronics and NXP each in the 4-6% range. A rough benchmark in the Greenwald framework is that share above 40% in a defined market marks a dominant position. On that measure TI falls short. It ranks first, and first by a wide margin, but it does not set the market's price.
Market position: Fairly Strong. Leading a fragmented market is worth real money, since TI's wafer scale and catalog give it cost and customer coverage that no single rival matches. It is not the kind of share that removes a customer's alternatives.
Stability: a held position, measured imperfectly
There is no consistent annual share series to test the five-year trend against, so revenue has to stand in. TI reported $18.34 billion in FY2021, $20.03 billion in FY2022, $17.52 billion in FY2023, $15.64 billion in FY2024 and $17.68 billion in FY2025, then $10.29 billion in the six months to June 2026. Revenue fell 22% from the 2022 peak to the 2024 trough. The analog market also contracted over that stretch, so part of the drop was the cycle and part was customers working off inventory they had stockpiled in 2021 and 2022. Growth of 13% in 2025 and 23% in the June 2026 quarter, against $4.45 billion a year earlier, suggests the base held through the trough.
Market position stability: Moderate. The downturn is the only real test inside the window, and the reported figures cannot separate share loss from inventory burn. If independent 2026 estimates put TI within 2 percentage points of where it stood in 2021, that rating should move up.
Profitability: returns stayed high through the trough
| Metric | FY2021 | FY2022 | FY2023 | FY2024 | FY2025 | H1 FY2026 |
|---|---|---|---|---|---|---|
| Revenue (USD bn) | 18.34 | 20.03 | 17.52 | 15.64 | 17.68 | 10.29 |
| Gross margin | 67.5% | 68.8% | 62.9% | 58.1% | 57.0% | 59.8% |
| Net margin | 42.4% | 43.7% | 37.2% | 30.7% | 28.3% | 34.2% |
| ROE | 69.0% | 62.7% | 41.4% | 28.4% | 30.7% | n/a |
ROIC is an estimate built from reported figures: equity plus debt minus cash as the capital base, EBIT taxed at the reported rate. On that basis TI earned roughly 19% after tax in FY2024 and 20% in FY2025, with figures above 30% in FY2021 and FY2022. The five-year average lands near 30%. Buybacks shrink book equity and depreciation has already written down older fabs, so the calculation probably overstates true economic returns, but not enough to change the conclusion: TI earned well above any reasonable cost of capital in every year of the window.
The trend is the caveat. Gross margin fell 11.8 percentage points from FY2022 to FY2025 while revenue fell 12%. Depreciation on new 300mm capacity, lower factory utilization and price concessions all contributed, and TI does not break out how much each cost.
Profitability: Strong. A 15%-25% average after-tax ROIC over a decade is the usual marker of a durable advantage; TI sits at or above that band even in a downturn year.
Overall rating: fairly strong, capped by a fragmented market
Overall rating: Fairly Strong. Profitability carries the rating: returns stayed comfortably above the cost of capital when the cycle turned, which is the hardest test a moat faces. Market position supports it but does not clinch it. A fifth of a market served by a dozen capable suppliers is protection against new entrants, not against the rivals already there.
Where the advantage comes from and how long it can last: a cost edge defended by breadth
TI names four competitive advantages in its 2025 annual report: manufacturing and technology, a broad analog and embedded portfolio, market channel reach, and long-lived customer positions. Three of those do real work. The manufacturing cost edge is the most durable, catalog breadth is the most underrated, and customer captivity is the weakest of the three. The open question is whether price competition at the commodity end of analog erodes the cost edge faster than the catalog can defend it.
Manufacturing: 300mm capacity is a cost edge that funds price
Supply-side advantage: Fairly Strong. Analog die are made on mature process nodes, but they are physically large, so wafer area drives cost more than transistor density does. A 300mm wafer carries about 2.25 times the area of a 200mm wafer, while the equipment, cleanroom and labor needed per wafer rise far less than that. TI has said 300mm production cuts die cost by roughly 40% versus 200mm, and its annual report describes moving products out of external foundries and legacy 150mm fabs into newer 300mm facilities, with a target of sourcing more than 95% of wafers internally and over 80% on 300mm by 2030.
The mechanism compounds. Lower die cost means TI can cut catalog prices to hold a socket when demand softens and still earn a return, which keeps its fixed-cost fabs loaded. A loaded fab spreads depreciation across more units, which lowers unit cost again. That is how a cost advantage turns into a share defense rather than a one-time margin gift.
The limit is that the edge is purchased, not owned. Rivals can build 300mm capacity too, and Infineon and STMicroelectronics have both announced 300mm power fabs. TI's lead is capacity already standing plus process and packaging know-how, not a patent. The bill is visible: gross margin fell to 57% in FY2025 from 69% in FY2022 as depreciation from the new fabs arrived before the revenue did.
Demand: design-in inertia is real, customer captivity is not
Demand-side advantage: Moderate. When an analog part is designed onto a board, replacing it means requalification: engineering time, reliability testing and, in automotive or medical applications, a fresh approval cycle. Industrial and automotive programs run for a decade or more, and TI says those two markets plus data centers are about three-quarters of its business. With more than 80,000 part numbers, reference designs and samples, TI is also the default place an engineer searches first, which lowers the customer's search cost and raises TI's chance of being designed in.
The channel reinforces this. More than 80% of revenue now moves directly through TI's own sales force and website, up from about a third in 2019, per the annual report. Direct relationships give TI visibility into which design projects are active, so it can push more parts into each one.
What holds the rating down is the absence of proof that this translates into pricing power. TI does not disclose design-win retention, churn or win rates, so the inference rests on behavior. During the last downturn TI's revenue fell faster than the analog market, which is at least consistent with customers trading down to cheaper commodity parts when the cycle turned. Inertia protects an existing socket. It does not stop a customer from choosing a rival for the next design.
Scale: an 80,000-part catalog is expensive to copy
Scale advantage: Fairly Strong. More than 100,000 customers, the largest at about 10% of revenue, buying from a catalog of over 80,000 parts: that structure turns fixed costs into a barrier. Mask sets, applications engineers, inventory and sales coverage in dozens of countries have to be paid for before the first order arrives. TI held about $4.8 billion of inventory in mid-2025, which is both the price of next-day availability and a hurdle for a smaller rival that cannot afford to stock 80,000 lines.
Breadth works because of the long tail. Most customers are small, and serving them is unprofitable unless a website and a catalog do the work. Scale spreads that cost across a base no specialist can match. A new entrant can build one excellent part; matching the catalog takes years of design wins and inventory investment.
Scale alone would not be a moat, though. Without the design-in inertia described above, a large catalog would be a cost burden rather than a barrier. The two advantages are worth more together than apart.
Durability: Chinese supply and chip integration are the threats that matter
The strongest threat is Chinese analog supply. China is a large market for TI and its government has pushed semiconductor self-sufficiency hard; a domestic supplier with adequate capacity and a widening catalog could take the commodity end of TI's line, where switching costs are lowest. The evidence so far only shows that TI's margins compressed during the downturn, not that Chinese suppliers caused it, and TI does not break out the source of its price concessions.
The second threat is integration. Some analog content is folding into power management ICs, systems-on-chip and digital power controllers, which reduces the number of discrete sockets over time. That erodes the market rather than attacking TI's position within it, and it moves slowly.
Neither threat breaks the moat. Both narrow it at the edges, which is where TI's lowest-margin, least-defended products sit. The check that would settle the durability question is margin recovery as revenue grows: if TI returns to double-digit revenue growth while gross margin stays near 57-58%, the cost advantage is being handed to customers in price, and the moat is thinner than the returns suggest. If gross margin climbs back toward the low-to-mid 60s on the same growth, the 300mm capacity is doing what it was built to do.
Generated by DeepVal AI. Data and models may contain errors or be outdated. For research only; not personalized investment advice.
Continue reading the full report
- Comparison and summaryHow Texas Instruments Incorporated compares with its closest rivals, and our moat rating
Free to sign up · 20 research points · unlocking this report uses 10
20 points cover 2 full reports. No card needed.
Research reflects its generation date. Preview the first two modules.
More on Texas Instruments Incorporated
Texas Instruments Incorporated
Business, moat and key questions
Open company page