Texas Instruments (TXN) · Deep analysis

Report previewTXN.USReport date Last updated
← Back to reports
Report contents
01

Business model

Business model: a catalog business carrying fab risk

Texas Instruments sells analog and embedded semiconductors. Analog chips regulate power, condition signals, and drive motors; embedded products are microcontrollers, processors, connectivity, and radar parts. The company reported $17.68 billion of revenue for 2025: analog $14.01 billion (about 79%), embedded processing $2.70 billion (15%), and other $979 million. Payment comes per order from roughly 100,000 electronics manufacturers, in small lots, increasingly through TI's own channel. More than 80% of 2025 revenue was direct, including TI.com, rather than through distributors. Analog is the business that matters. This is a mature, vertically integrated manufacturer midway through a capacity expansion, and its economics still follow the analog cycle.

Analog carries the profit; embedded is the smaller bet

The mix is lopsided in a way that decides the case. Analog is four-fifths of revenue and has carried the higher segment operating margin; embedded processing at 15% has to earn its wafer starts against analog parts that use the same 300mm capacity. Breadth is the mechanism. TI lists more than 80,000 products, and the value is that an engineer designing a power supply can find the signal-chain and control parts for the same board in one place. Embedded products carry more customer software, which can deepen a relationship, but the segment is small enough that its growth moves the mix only at the margin. On the evidence so far, embedded is a share-of-wallet play, not a second profit engine.

Small customers are the pricing mechanism

Customers are numerous and individually small, and that is where TI's bargaining power comes from. About half of revenue comes from customers outside its 50 largest, so no single account can dictate terms, and the catalog means no single socket decides the year. It cuts the other way too: if no customer is large, none is locked in deeply enough to pay a big premium, and most standard parts have a second source. Stickiness comes from requalification. Changing an analog component in an industrial or automotive design means new testing and new approvals, a cost that usually dwarfs the price of the part. That is a genuine switching cost, but it buys time, not pricing power on its own.

300mm is a cost moat, and cost moats get tested

The manufacturing position has the clearest arithmetic. TI fabricates most of its wafers and does most of its assembly and test in-house, and it estimates that an unpackaged chip built on a 300mm wafer costs about 40% less than the same chip on 200mm. Because analog parts stay in production for years, that gap compounds across a long shipment tail. Industrial and automotive were 33% each of 2025 revenue, personal electronics 21%, data centers 9%, communications 3%. That spread is why no single end market can sink the company and why a broad industrial recovery lifts it. The price of the position is fixed cost: depreciation arrives when a fab is finished, revenue arrives when customers order.

The fragility sits in the same place. A 40% die-cost lead is worth a great deal when capacity is tight and much less when the industry holds spare 300mm capacity, including the capacity Chinese suppliers are adding for standard analog and microcontroller parts. TI's answer is catalog breadth and design-in inertia on parts that are hard to second-source, which works best on automotive and industrial sockets with long qualification cycles and least well on commodity power-management parts a customer can move in a quarter.

What would overturn this assessment

A catalog that stops compounding would do it. Watch whether analog gross margin recovers as utilization rises through 2026; if the die cost really is lower, it should. Watch whether direct-channel growth coincides with a falling customer count or flat revenue outside the top accounts, which would mean TI is selling more to the same buyers. And watch catalog pricing on standard parts. TI does not publish design-win counts, book-to-bill, or unit volumes by end market, so outsiders see the outcome in revenue and margin after the fact. Cash conversion and the capital program belong with financial quality; the question here is whether the catalog still wins designs.

Questions worth following

  • Can TI hold catalog pricing as customers gain second sources?

    Most catalog parts have substitutes, so pricing is the cleanest test of whether design-in inertia is real. Stable prices through a recovery would show switching costs binding; discounting would show customers treating analog as a commodity, which lowers gross margin and the return on the 300mm build.

  • Can TI's direct channel keep adding customers as distributors recede?

    Direct sales carry more than 80% of revenue, so the channel decides whether TI reaches new small customers or mainly serves existing ones more cheaply. Wider reach sustains the fragmented base behind catalog pricing; narrower reach leaves volume dependent on accounts large enough to negotiate.

  • Can embedded processing become TI's second profit pool?

    Embedded processing is 15% of revenue and shares fabs and engineering with analog. Faster growth with improving segment margin would show TI building a second franchise that earns its capacity. Growth without margin would leave profit dependent on analog and make the expansion harder to justify.

02

Financial quality

Financial quality: the fab bill is finally paying off

Texas Instruments spent four years building 300mm capacity into an analog downturn, and the income statement carried the cost before the revenue arrived. Gross margin fell from 68.8% in FY2022 to 57.0% in FY2025, and free cash flow bottomed at $1.35 billion in FY2023. The quarter ended September 30, 2026 is the clearest evidence yet that the direction has reversed: TI reported revenue of $6.06 billion, up 28% from a year earlier, operating profit of $2.87 billion and net income of $2.43 billion, with gross margin back to 64.2%. Earnings now convert to cash at a high rate, and the funding question has flipped from whether TI can pay for the fabs to how much of the savings it hands back.

USD bn unless statedFY2021FY2022FY2023FY2024FY2025TTM to Sep 2026Assessment
Revenue18.3420.0317.5215.6417.6820.77Strong
Gross margin %67.568.862.958.157.060.2Adequate
Operating margin %48.950.641.834.934.140.8Strong
Net margin %42.443.737.230.728.334.2Strong
ROE %69.062.741.428.4≈30≈37Strong
Operating cash flow8.768.726.426.327.159.90Strong
Capex2.472.805.074.824.552.60—
Free cash flow6.295.921.351.502.608.42Strong
OCF / net income (x)1.131.000.991.321.431.39Exceptional
Capex / revenue %13.514.028.930.825.712.5—
Liabilities / assets %46.046.447.852.452.947.9Adequate

FY2025 and trailing ROE are calculated from reported net income and average equity. Capex is derived as operating cash flow less reported free cash flow, and the trailing free cash flow is the company's definition, which adds CHIPS Act incentive proceeds.

USD bnQ1 25Q2 25Q3 25Q4 25Q1 26Q2 26Q3 26AssessmentTrend
Revenue4.074.454.744.424.835.466.06ExceptionalImproving
Gross margin %56.858.057.455.958.061.464.2StrongImproving
Net income1.181.291.361.161.541.982.43StrongImproving
Total assets33.7634.9335.0034.5934.3935.8836.84—Stable
Total liabilities17.3518.5318.3818.3117.6217.8817.65AdequateStable
Net PP&ENot disclosedNot disclosedNot disclosedNot disclosedNot disclosedNot disclosed11.83—Stable
Operating cash flow0.851.862.192.251.522.703.42StrongImproving
Capex1.121.311.200.920.680.510.46—Falling
Free cash flow-0.270.550.991.330.842.192.96StrongImproving
Returns: margin, not leverage

Trailing net income of $7.11 billion on $19.19 billion of equity is a return near 37%, and it does not rest on a stretched balance sheet. Liabilities are 47.9% of assets, total debt of $13.6 billion sits against $8.1 billion of cash and short-term investments, and quarterly interest expense of $141 million is covered about twenty times by operating profit. Buybacks have not hollowed out the equity base either: book equity has risen from $16.27 billion at the end of FY2025.

The operating margin is the better measure of what changed, moving from 34.1% in FY2025 to 40.8% on a trailing basis. Depreciation rose roughly 12% year over year in the September quarter while revenue rose 28%, so fixed costs that had been arriving ahead of demand are now spreading across it. An estimate from reported figures puts trailing NOPAT near $7.3 billion on about $25 billion of invested capital, a return around 29%.

Asset turnover tells the same story from the other side. Revenue over average assets was 0.77 in FY2022 and 0.46 in FY2024; on a trailing basis it is about 0.58, with net PP&E of $11.83 billion against $6.88 billion at the end of FY2022. TI does not need to regain 0.77 turns to earn good returns, but that gap is why a 64.2% gross margin produces less ROE than the 68.8% of FY2022 did.

Cash: capex fell faster than earnings rose

Capital expenditure ran $5.07 billion in FY2023 and $4.55 billion in FY2025; over the last twelve months it was about $2.6 billion. Operating cash flow was $9.90 billion over the same period, so free cash flow reached $8.42 billion on the company's definition, which adds CHIPS Act incentive proceeds. On operating cash flow less capex alone the figure is nearer $7.3 billion. Either way it covers the $5.81 billion returned to owners, which FY2025's $2.60 billion of free cash flow did not.

Dividends of $5.17 billion equal about 73% of trailing net income, and buybacks were cut 61% to $636 million. Protecting the payout while the cash base rebuilds is a defensible trade, but it only works while capex stays near current levels. Tool installations for the next fab modules would lift spending again before the associated revenue shows up.

Working capital: inventory is the last large balance

Inventory of $4.67 billion has barely moved in a year while revenue rose 28%. Turns work out to roughly 1.74, or about 210 days of cost of revenue, against 3.09 turns in FY2021. The mix is encouraging: finished goods fell 13% to $1.69 billion while work in process was flat, which is what shipping out of stock looks like. Receivables of $2.62 billion grew 27%, in line with sales, so collections are not stretching.

The exposure is straightforward. If end demand stalls, $4.7 billion of stock stays on the books and depreciation from the buildout continues regardless. Long product lives in the analog catalog support the inventory but do not make it immune to a prolonged stall. TI's commentary on industrial, automotive and data center demand is the usable read here, since it does not publish distributor sell-through.

What to check
  • The free cash flow definition. Roughly $1.1 billion of the $8.42 billion trailing figure is incentive money rather than operations, and receipts are tied to capital spending. What remains of the award, and how fast it disburses as building capex falls, decides how much of the headline number is repeatable.
  • The tax rate. The September quarter's provision of $380 million on $2.81 billion of pretax income is a 13.5% rate, well below the 21% statutory rate. Investment and manufacturing credits are doing real work; a drift toward the high teens would take roughly a tenth off net income at unchanged operating profit.
  • Dividend coverage through a downturn. At 73% of earnings the payout has little slack if revenue rolls over. The $8.1 billion of cash and short-term investments is the buffer, and the buyback has already been scaled back to preserve it.

Questions worth following

  • Can Texas Instruments keep funding its dividend and buybacks if free cash flow stays below fab-buildout spending?

    FY2025 financing outflows of USD 5.69 bn exceeded free cash flow of USD 2.60 bn, so distributions drew partly on the balance sheet. Continued spending above internally generated cash would raise leverage and the return investors demand, thinning the valuation cushion.

  • Will TI's effective tax rate rise as fab construction winds down?

    The September 2026 quarter carried a 13.5% provision on pretax income, far under the 21% statutory rate, because investment and manufacturing credits track capital spending. A rate drifting toward the high teens would remove roughly a tenth of net income at unchanged operating profit.

Generated by DeepVal AI. Data and models may contain errors or be outdated. For research only; not personalized investment advice.

Go beyond the preview

Continue reading the full report

  1. Key risksWhat could break the investment case
  2. Valuation and margin of safetyWhat the current price assumes, and how much room for error it leaves
  3. SummaryOur overall judgement and what to watch next

Free to sign up · 20 research points · unlocking this report uses 10

20 points cover 2 full reports. No card needed.

Research reflects its generation date. Preview the first two modules.

More on Texas Instruments Incorporated