KLA (KLAC) · Deep analysis

Report previewKLAC.USReport date Last updated
← Back to reports
Report contents

At a glance

  • Business model: KLA sells process-control inspection and metrology systems, plus service on the installed base, to a small group of leading-edge logic and memory manufacturers. Systems were 77% of fiscal 2026 revenue and services 23%; process control is a small slice of fab spending but a large influence on yield, while customer concentration and acceptance-based timing are the obstacles.
  • Financial quality: Fiscal 2026 revenue of $13.58 billion produced a 41.7% operating margin and an estimated 36.5% ROIC, but operating cash flow covered only 0.86x of net income and free cash flow equaled 78% of earnings. Long-term debt of $5.72 billion against $4.74 billion of cash and marketable securities at September 30, 2026 is covered, though the weaker conversion narrows flexibility.
01

Business model

Business model: paid for yield, not for capacity

KLA sells process control: inspection and metrology systems that find defects and measure features while wafers are in process, the software that converts those measurements into yield decisions, and service contracts on tools already installed. The buyers are the small group of logic and memory manufacturers building leading-edge fabs. They pay per tool, largely on acceptance, then annually for service, spares and upgrades tied to how hard the installed base runs. That makes KLA a differentiated capital-equipment manufacturer with an annuity attached. It carries no wafer-volume risk and takes no share of the chip revenue its tools make possible. Fiscal 2026 finds it in a cyclical expansion: revenue grew 12% in 2024 and 17% in 2025, and CFO Bren Higgins guided to low-20s growth for 2026 at Citi's Global TMT conference in September 2026.

Geographic mix follows where leading-edge capacity is installed, not where chips are consumed, so it shifts with each customer's build schedule; the 10-K's geographic revenue split is the only consistent way to track it. Revenue is recognized on acceptance, which leaves KLA holding tools and components until a fab can take them. Inventory and receivables follow the order book with a lag, so a strong bookings quarter can precede the cash by more than a quarter.

A minority of the budget, a majority of the yield

Process control is a small part of a fab's equipment spending and a large part of whether that spending produces sellable chips. A missed defect at a leading-edge node costs a customer far more than the inspection step that would have caught it, and that asymmetry is the foundation of KLA's price. Higgins calls gross margin the clearest evidence of differentiation in the industry. KLA's operating margin has held between roughly 37% and 42% across five fiscal years and gained about 400 basis points over the last three, which is what a supplier with real capability looks like. Pricing is set tool by tool and generation by generation: new capability carries a premium, and cost increases get passed through when the customer needs the node. The counterweight is that every point of margin invites a customer to qualify a second source on the steps where switching is cheapest.

One reportable segment, a short buyer list

KLA reports a single operating segment, so product and customer mix comes from the product-line and concentration disclosures; the segment table shows one line. Systems produced $10.45 billion of fiscal 2026 revenue and services $3.13 billion, about 23% of the total. The buyer list is short, and the customer concentration note carries more weight here than at a diversified equipment maker. The same handful of customers appear in every geography, so one logic or memory customer delaying a node moves a year of KLA's revenue even when total industry spending is unchanged. Bargaining power runs both ways: KLA owns the capability, while the customer owns the decision to fund a rival's qualification, made node by node.

Services revenue rose 16% to $3.13 billion in fiscal 2026 and tracks installed tools and how hard customers run them. That is real ballast at roughly a quarter of revenue, and not enough to carry the company through a systems downturn. Fiscal 2024 is the arithmetic: revenue fell 6.6% and net income fell 18.6%.

What the backlog tells you, and what it does not

Demand estimates moved up through 2026. KLA began the year expecting wafer fab equipment spending of $135 billion to $140 billion and now expects more than $150 billion, with second-half revenue about 20% above the first half. Backlog reached $12.6 billion, up 60% from fiscal 2025, disclosed in the 10-K filed in early August 2026, and management describes shipment visibility through 2027 and in some cases into early 2028. Higgins expects 2027 growth in a similar range or higher, and part of the demand is structural: gate-all-around transistors and advanced packaging add process-control steps per wafer, raising KLA's content where volume is growing. Customers can support the spending, he said, because their own profitability is extremely high. The disclosure limit is real: backlog is published annually, not quarterly, and is not broken out by customer, node or delivery quarter. Investors know its size, not its concentration.

The binding constraint in 2026 is execution. Higgins put component supply and the engineering capacity to deliver next-generation tools at the top of the priority list, and said customers are struggling with cleanroom space as they try to absorb equipment. That is how a firm order book slips: a fab that cannot take delivery on schedule, with the order still on the books. The judgment worth testing is that pricing holds through a volume cycle, since the last downturn took revenue down 6.6% without breaking the margin band. Gross margin falling into the low 50s while wafer fab equipment spending is still rising would break that view, because cyclical volume alone has not done it before.

Questions worth following

  • Will process-control intensity per wafer keep rising as leading-edge logic and advanced packaging scale?

    Content per wafer is the growth engine if inspection and metrology step counts rise with node complexity and packaging. If customers cap those steps to protect capital budgets and cycle time, KLA's growth depends on industry wafer volumes it does not control.

  • Will gate-all-around and advanced-packaging ramps shift process-control spending away from KLA's core tools?

    New process steps create inspection and metrology demand but also invite rivals to qualify their tools as the step is being defined. Losing share at a node generation is hard to reverse because qualification carries into the next node.

  • Will KLA convert its $12.6 billion backlog without slipping delivery schedules?

    A $12.6 billion backlog is worth only its conversion schedule. If deliveries slip, revenue moves out of the year, free cash flow falls behind distributions already committed, and the order visibility management cites through 2027 is worth less than it appears. Supply and cleanroom readiness decide that timing.

02

Financial quality

Financial quality: high returns, thinner cash conversion

KLA still earns returns that would look implausible in most capital-intensive industries, and the fiscal year ended June 30, 2026 did not change that. Revenue of $13.58 billion produced $5.66 billion of operating income and $4.83 billion of net income, a 35.6% net margin on a 41.7% operating margin, both the best of the last five years. The number that moved the wrong way is cash. Operating cash flow covered 0.86x of net income, against 1.00x to 1.20x in each of the four prior years, and free cash flow of $3.77 billion equaled 78% of earnings versus 90% to 110% earlier. KLA still funds itself comfortably; the cushion between reported profit and cash has narrowed at the same moment revenue is accelerating.

Returns: 36% on capital, with an ROE that measures buybacks

After-tax operating profit has run near 36% of capital employed (equity plus assets less current liabilities) in four of the last five years, dipping to 28.5% in fiscal 2024. Gross margin has held between 59.8% and 62.3% every year since fiscal 2022, while asset turnover sits at 0.76. A toolmaker keeping 61 cents of gross profit per revenue dollar and turning its asset base less than once a year is a margin business, which puts pricing and product mix ahead of factory utilization as the driver to track.

The reported ROE of 76% in fiscal 2026, and 139% to 157% in fiscal 2022 and 2023, is arithmetic on a deliberately thin equity base. Equity is $6.35 billion against $17.95 billion of assets because KLA returns nearly everything it generates: financing outflows were $3.39 billion against $3.77 billion of free cash flow. ROE therefore describes the payout policy, and ROIC describes the business. Distributions at about 90% of free cash flow leave little room to absorb a weak cash year without borrowing or drawing down cash.

Cash: the gap opened just as shipments set records

Conversion ran at 1.19x in the December 2025 quarter, then 0.59x in March 2026 and 0.67x in June 2026, precisely as revenue reached $3.42 billion and $3.66 billion. Revenue booked on tool acceptance outruns collection, and inventory builds ahead of shipment; which line absorbed the cash is not visible in the headline balance sheet figures, and the annual filing's receivables and inventory detail would settle it. Inventory turnover of 1.47x at June 2025 implies roughly eight months of cost of goods, long even for equipment with extended lead times and a spares business. Receivable days had been improving, at 64 in fiscal 2025 from 73 a year earlier, so collections were not the obvious problem going into the shortfall.

Revenue growth has if anything sped up. StockStory's November 3, 2026 summary of the September 2026 quarter put revenue at $4.14 billion, up 28.9% year over year, with December-quarter guidance of $4.7 billion. If conversion stays near 0.6x while revenue compounds at that rate, free cash flow stays below earnings and the 90% payout ratio becomes a constraint rather than a choice.

Leverage: 65% of assets, but 20x interest cover

Liabilities at 64.6% of assets would normally read as strain. Here it reflects debt sitting on a shrunken equity base: long-term debt was $5.88 billion at June 2025, interest expense of $0.28 billion ran against $5.66 billion of operating income, and coverage of about 20x is comfortable. The real constraint is liquidity. Cash fell to $1.65 billion from $2.08 billion while current liabilities rose to $4.30 billion, a cash ratio near 0.4. Current assets are not disclosed for fiscal 2026, so the current ratio cannot be computed, but roughly $1 billion of quarterly operating cash flow covers the gap unless conversion stays near 0.6x. Goodwill of $1.79 billion is steady at about 10% of assets and modest relative to earnings.

The cyclical test has already run once

Fiscal 2024 is the useful precedent: revenue fell 6.6% and net income fell 18.6%, showing operating leverage in reverse through a 37.1% operating margin. Cash held up better than earnings, with operating cash flow of $3.31 billion and 1.20x conversion, because working capital released as shipments slowed. If the fiscal 2026 shortfall is the same timing effect in the opposite direction, a slower year restores conversion. If it reflects longer customer terms or heavier inventory held to protect lead times, free cash flow stays structurally below earnings. Two things would settle it: the receivables and inventory lines in the fiscal 2026 annual filing, and whether fiscal 2027 conversion returns above 1.0x while revenue is still growing.

Annual metrics

USD bn except ratios and percentages.

MetricFY2022FY2023FY2024FY2025FY2026FY2026 Q4Assessment
Revenue9.2110.509.8112.1613.583.66Strong
Gross margin %61.059.860.062.361.361.2Strong
Operating margin %39.638.137.141.241.742.3Strong
Net margin %36.132.328.133.435.637.2Exceptional
Net income3.323.392.764.064.831.36Strong
ROE %139.0156.887.8100.876.027.7Exceptional, thin equity
ROA %29.125.418.725.826.97.7Strong
ROIC, est. %35.835.728.536.536.5n.d.Exceptional
Asset turnover x0.810.790.670.770.760.20Adequate
Liabilities/assets %88.979.378.270.864.664.6Demanding, well covered
Current ratio x2.502.242.152.62Not disclosedNot disclosedStrong
Interest coverage x22.813.611.316.520.222.1Strong
Inventory turnover x1.931.471.331.47Not disclosedNot disclosedWeak
Receivable days69677364Not disclosedNot disclosedAdequate
Operating cash flow3.313.673.314.084.140.91Strong
Free cash flow3.003.333.033.743.770.82Strong
OCF/net income x1.001.081.201.000.860.67Adequate
Capex/revenue %3.43.22.92.82.72.5Exceptional

*Quarter column: single-quarter figures, not comparable to full-year flows. ROIC estimated as after-tax operating income divided by equity plus assets less current liabilities.

Net PP&E, disclosed at $1.03 billion in June 2023, is small against total assets; capex near 3% of revenue confirms an asset-light equipment model where tools are built to order.

Quarterly metrics

USD bn except percentages and ratios. Fiscal quarters; KLA's fiscal year ends June 30.

PeriodRevenueNet incomeGross margin %Net margin %OCFFCFOCF/NI xTotal assetsTotal liabilitiesAssessmentTrend
FY2025 Q1 (Sep 2024)2.840.9559.633.30.990.931.0415.6812.12StrongStable
FY2025 Q2 (Dec 2024)3.080.8260.326.80.850.761.0415.0011.42AdequateMargin trough
FY2025 Q3 (Mar 2025)3.061.0961.635.51.070.990.9815.1911.18StrongImproving
FY2025 Q4 (Jun 2025)3.171.2063.237.91.171.060.9816.0711.38StrongImproving
FY2026 Q1 (Sep 2025)3.211.1261.434.91.161.071.0416.3211.33StrongStable
FY2026 Q2 (Dec 2025)3.301.1561.534.81.371.261.1916.7211.25StrongImproving
FY2026 Q3 (Mar 2026)3.421.2061.135.10.710.620.5916.8711.04AdequateCash weakening
FY2026 Q4 (Jun 2026)3.661.3661.237.20.910.820.6717.9511.60AdequateCash still weak

The pattern argues for working-capital timing rather than an earnings problem: margins and revenue rose through the two weak-conversion quarters, and nothing in the income statement deteriorated. The cash gap is the open item.

Generated by DeepVal AI. Data and models may contain errors or be outdated. For research only; not personalized investment advice.

Go beyond the preview

Continue reading the full report

  1. Key risksWhat could break the investment case
  2. Valuation and margin of safetyWhat the current price assumes, and how much room for error it leaves
  3. SummaryOur overall judgement and what to watch next

Free to sign up · 20 research points · unlocking this report uses 10

20 points cover 2 full reports. No card needed.

Research reflects its generation date. Preview the first two modules.

More on KLA Corporation